Electrical Engineering Power PE Crunch Time

A 30-Day Plan to Prepare for the
Electrical Engineering Power PE Exam

Electrical Engineering Power PE Crunch TimeClick HERE for more Electrical Engineering Power PE Crunch Time Resources

Checklist:

  1. Graduated from an ABET accredited engineering program … check
  2. Passed the Fundamentals of Engineering Exam … check
  3. Worked under the supervision of a licensed professional engineer for at least 4 years … check
  4. Applied for and received approval from your state’s engineering board to sit for the examination … check
  5. Registered with NCEES to take the Electrical Engineering PE Exam … check
  6. Studied and prepared diligently for the past 2 to 3 months … oops!

Items 1 thru 5 were relatively easy.
You went to college, got your engineering degree, and passed the FE Exam in your senior year.
You then took an engineer-in-training position and put in your 4 years learning to be a practicing engineer.
Your supervisors and co-workers then began encouraging you to pursue professional licensing.
So you filled out the paperwork, contacted to your local board, and got approved for the exam.
You applied to NCEES, paid the fees, and have a reserved spot on exam day.
But then something happened.

Life. Work. Stuff.

No matter how hard you tried; no matter how dedicated you meant to be; you just haven’t been able to prepare.
And the exam is in little over a month.

Panic.

But there’s still time if you’re willing to put in the effort and commit to giving it your best effort.

  • This plan is aggressive.
  • You won’t have much of a life outside of work for the next month but that’s a small price to pay to prepare for the exam.
  • You will have to work hard.

If this is your situation and you’re ready to make this happen, let’s get started …


Each day is listed below with specific topic(s) to study.

Each topic will require:

  • Research
  • Resource gathering
  • Problem solving
  • Organization into your Test-Day Resource Library©

Some of the topics are hot-links to:

  • useful information (i.e. Research and Resource gathering)
  • sample or practice problems (i.e. Problem solving)

I highly encourage you to print what you find (information, examples, charts, sample problems, etc.) and organize into binders for easy retrieval on exam-day.

It’s Electrical Engineering Power PE Crunch Time

 


GENERAL POWER ENGINEERING
Measurement and Instrumentation

Day 1

Day 2

Special Applications

Day 3

Day 4

Day 5

Day 6

Day 7

Codes and Standards

Day 8


CIRCUIT ANALYSIS
Analysis

Day 9

Day 10

Day 11

Day 12

Devices and Power Electronic Circuits

Day 13

Day 14


ROTATING MACHINES AND ELECTROMAGNETIC DEVICES
Rotating Machines

Day 15

Day 16

Day 17

Day 18

Day 19

Day 20

Electromagnetic Devices

Day 21

Day 22


TRANSMISSION AND DISTRIBUTION (HIGH, MEDIUM, AND LOW VOLTAGE)
System Analysis

Day 23

Day 24

Day 25

Day 26

Power System Performance

Day 27

Day 28

Protection

Day 29

Day 30

 

Click HERE for more Electrical Engineering Power PE Crunch Time Resources

Electrical Engineering Power PE Crunch Time

Electrical Engineering Power PE

Leave a Reply